Eternal Lighting CUBE5 Spezifikationen PDF herunterladen (Seite 5)

EchoICON and EchoEDGE Manual

Menu:

 DMX Address and Channel Mode – Press Enter to move up and down between

DMX Addr and CH also press Enter to save a command.

 Master/Slave – Press Up or Down to change the command of Master or Slave, Enter

to save the command. (NOTE: In order to use the IR Remote, put the CUBEecho in

Master Mode. The CUBEecho will not respond to the IR Remote if it is in Slave

Mode.)

 Manual Color Mix – Press Enter to go through Red, Green, Blue, White, and Amber.

Press Up or Down to adjust color brightness on a scale of 0-255. Enter to save. This

color can be found in Color 50.

 SHND –Press Up to scroll through options: Color, Sound, and Fade. Enter to select

choice.

o Color – Pre-set colors 1-50, after color 50 is AUTO change (Speed 1-8). After

AUTO, is Custom Color A – E; Enter make a custom color. You can make 5

custom colors that will be saved under A through E.

o Sound – Sound 1 (auto change when hears sound & Fade when quiet). Sound

2 (Strobe effect when hears sound & Fade when quiet).

o Fade – Color Fade 1 through 10. Fast (1) to slow (10).

 Boot Time and Work Time – Current operating time and total run time

 Battery Capacity – Percentage left on the battery

 LCD Display Time – Full On

 IR INFA – Enable or Disable

Receiver button – ON/OFF

ID Code Selector – Red (1), Green (2), Yellow (3), Blue (4), Purple (5), Cyan (6), White (7)

To Master/Slave the EchoEDGE or EchoICON, put one fixture in Master Mode and the rest

of the fixtures in Slave Mode. Turn on the Receiver button and put all fixtures on same ID

Code Color. You now control the Master fixture and all the Slave fixtures will do what the

Master is doing.

Trick: To Master Reset your EchoICON or EchoEDGE, press Menu and Enter button at the

same time for 5 seconds. This will put Address back to 1, Channel back to 5, Slave Mode,

Manual Colors back to 255, and put all custom colors (A-E) to 0.

1 2 3 4 5 6 7 8 9 10

Keine Kommentare

Eternal Lighting CUBE5 Spezifikationen Seite 5